K-1 Fluid Power Products

Contact K-1 Fluid Power

Western Australia
Phone: (+61 8) 9358 2300

New South Wales Office
Phone:(02) 9675 4900

Queensland Office
Phone: (07) 3246 5201

or Use Form To Send An Email

Control Valves

Check Valve - Direct Operating - Type C » Type C series 10 check valves are direct acting valves that allow free flow in one direction and block any reverse direction flow.

Pressure Relief Valve - Pilot Operated - Type RB/RBE » Functional Description Type RB and RBE series 10 Pressure relief valves are balance piston , seat type, relief valves that are used: To control the maximum pressure within a hydraulic circuit, preventing overload. To control by loading/unloading hydraulic circuit pressure.

Check Valve - Hydraulic pilot - Type CH » Type CH series 10 Check valves are pilot operated valves that may be hydraulic operated to permit reverse flow. Valves may be supplied with or without drain ports. These valves are used to isolate a hydraulic circuit under pressure.

Directional Spool Valve - Solonoid Operated - Type DE6 » Type DE6 series 20 Directional Spool Valves are solenoid operated directional spool valves that are used to control (start, stop and direction) fluid flow.

Directional Spool - Pilot Operated - Type DEH16 » Type DEH16 valves are 3/ 4 way directional spool valves with a spring centering control spool. These valves are electro-hydraulic directional spool valves that are used to control (start, stop, and direction) fluid flow.

Pressure Relief Valve - Direct Acting - Type RD » Type RD Series 10 Pressure relief valves are direct operated, seat type, relief valves, used to prevent sudden pressure increases and to support the load within a hydraulic system.
Pressure Reducing Valve - Direct Acting - Type PRD » Type PRD6P pressure reducing valve is a direct operated valve of 3 way design ie with a pressure relief function on the reduced pressure side. The valve is used to reduce the pressure on a section of a circuit.

Pressure Reducing Valve - Pilot Operated - Type PRB » Type PRB series 10 pressure reducing valves are balanced piston, pilot operated reducing valves that are used to reduce pressure in a hydraulic circuit. Type PRB series 10 pressure reducing valves will maintain the specified secondary side pressure even when the primary side pressures fluctuate.

Throttle Valve - Type T » Type T series 10 throttle valves are pressure and viscosity dependent throttle valves that comprise an adjustable sleeve, a housing side drillings and a throttling point.

Throttle Valve - Type TC » Type TC series 10 throttle valves are pressure and viscosity dependent throttle check valves. The valves throttle the flow in one direction and allows free flow in the reverse direction.

Flow Control - 2 Way - Compensated. Type FJC » Type FJC series 10 Flow Control Valves are used to maintain a constant flow independent of pressure and temperature. These valves do not have the options of external closing and check valves.

Sandwich Type SC - Check Valve - Direct Acting » Type S-C6 and S-C10 series 10 check valves are directly controlled valves of sandwich plate design. The valves provide leak free closure in one direction and free flow in the opposite direction.

Sandwich Type S-CH - Check Valve - Pilot Operated » Sandwich Type S-CH 10 series 10 Check Valves are pilot controlled valves of sandwich plate design. The valves provide leakage free closure in one direction for one or two actuator ports and free flow in the other direction. These valves can be used for prolonged standstill periods.

Sandwich Type S-(2)RB - Pressure Relief valve - Pilot Operated » Type Sandwich S-(2)RB series 10 Pressure Relief Valves are pilot controlled valves of sandwich plate design. The valves provide pressure limitation within a hydraulic system.

Sandwich Type S-PRD - Pressure Reducing -Direct Acting » Type S- PRD series 10 pressure reducing valves are direct acting valves of sandwich plate design, that provide pressure reduction with a pressure relief function on the secondary side.

Sandwich Type S-2TC Double Throttle Check » Type Sandwich S-2TC series 10 relief valves are double throttle /check valves of sandwich plate design. The valves provide pressure limitation to the main or pilot flow of one or two actuators. The valves limit the flow in one direction and allow free flow in the other.

Mobile Valve, Foot Operated RCV » Download additional information on this product. RCV Technical Specification.

Mobile Joystick Pilot Valves. Type PV48 » Download additional information on this product. Technical Specification Joystick Type remote pilot valve PV48K